Anna’s Tales CAL-Part 2

Happy New Year!

Welcome to Part 2 of my Anna’s Tales CAL!

It’s 2021 already, which means we’ll have a lot of new opportunities to try something new or achieve and set goals. 🙂

If you want to refresh your memory before start, you can find all of the information about the CAL HERE.

Part 1 can be found HERE.

If you prefer, the pattern is available as a downloadable PDF file. You can get it for a small fee on Ravelry HERE.

If you love what I create, you can support me to create more beautiful free patterns by buying me a virtual coffee:
https://ko-fi.com/kamecrochet

This pattern and photographs are the property of K.A.M.E. Crochet by Krisztina Anna Matejcsok-Edomer and are for personal and non-commercial use. You may not alter or sell this pattern in any way. You may sell finished products, but please credit K.A.M.E. Crochet if you can. Thank you!

Difficulty:                           Intermediate/Advanced

Finished Size:                   87.5cm x 87.5 cm / 34.5″ x 34.5″ AFTER BLOCKING

Stitches Used and Abbreviations:

You can find a detailed description of all of the special stitches used, in a PDF file HERE:

Gauge: 5 half double crochet stitches and 3 rows = 1″ / 2.5cm

Additional notes:

• If a row/round starts with a Chain 1 or 2, this is not counted as a stitch, unless stated otherwise.
• Slip stitches do not count as stitches.
• CH 3 always counts as double crochet.
• US terms used throughout
• At the end of every round, there’s going to be a note with the stitch count, so you can keep track of your work easily and avoid any mistakes. It’s written in a different color; the first line in bold is always the total stitch count for the round (starting with round 18, this excludes corner stitches). Below that, I included a stitch count per side (excluding corner stitches) and per corner too, in case you prefer it that way.
• When working on the corners, always remember that there might be a hidden stitch hiding under the corner stitches which is the first stitch of the previous row
• When you make a normal puff stitch, it creates 2 loops on its top. I will refer to these loops as first loop and second loop. The first loop is always the one on the right and the second one is on the left.
• Notes are written in a different color in (brackets) to help you through the pattern.
• You can start each round as I did in the pattern or you can use a standing stitch or chains, it’s totally up to you!

Instructions

Round 22: SLST to CH 2 SP, {CH 3 (counts as DC), 1 DC, CH 2, 2 DC} in CH 2 corner SP (corner), [1 DC in next ST, SK 2 STS, {V ST in next ST, SK 2 STS} 15 times, 1 DC in last ST on side, {2 DC, CH 2, 2 DC} in CH 2 corner SP] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 8 DC, 60 V ST

Per side: 2 DC, 15 V ST

Corner: 2 DC, CH 2, 2 DC

---

After finishing Round 22:

---

Round 23: SLST to CH 2 SP, {CH 3 (counts as DC), 4 DC, CH 2, 5 DC} in CH 2 corner SP (corner), [SK 4 STS (3 DC+1^st DC of V ST), 1 SC in CH 2 SP of V ST, {7 DC in next CH 2 SP of next V ST, 1 SC in next CH 2 SP of next V ST} 7 times, SK next 4 STS (last DC of last V ST+3 DC), {5 DC, CH 2, 5 DC} in CH 2 corner SP (corner)] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 28 Shells, 32 SC

Per side: 7 Shells, 8 SC

Corner: 5 DC, CH 2, 5 DC

---

After finishing Round 23:

---

Round 24: SLST to CH 2 SP, {CH 3 (counts as DC), 1 DC, CH 2, 2 DC} in CH 2 corner SP (corner), [1 BPDC around next 5 STS, 1 FPTR around first DC of Round 22, SK next ST (SC), {1 FPTR around first DC of V ST with Shell in it from Round 22, 1 BPDC around next 7 STS, 1 FPTR around last DC of V ST with Shell in it from Round 22, SK next ST (SC)} 7 times, 1 FPTR around last DC of Round 22, 1 BPDC around next 5 STS, {2 DC, CH 2, 2 DC} in CH 2 corner SP (corner)] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 236 BPDC, 64 FPTR

Per side: 59 BPDC, 16 FPTR

Corner: 2 DC, CH 2, 2 DC

---

Start of Round 24:

After finishing Round 24:

---

Round 25: SLST to CH 2 SP, CH 1, [{2 SC, CH 2, 2 SC} in CH 2 corner SP (corner), 1 SC in next 4 STS, CH 2, SK next 4 STS (3 DC,1 FPTR), {1 1LOPuff ST, CH 1, 1 1LOPuff ST, CH 1, 1 1LOPuff ST} in SC from Round 23 (the TR STS should be behind the Puff STS), CH 2, SK next 4 STS (1 FPTR, 3 DC), [1 SC in next ST (4^th ST of Shell), CH 2, SK 4 STS (3 DC,1 FPTR), {1 1LOPuff ST, CH 1, 1 1LOPuff ST, CH 1, 1 1LOPuff ST} in SC from Round 23 (the TR STS should be behind the Puff STS), CH 2, SK next 4 STS (1 FPTR, 3 DC)] 7 times, 1 SC in next 4 STS] 4 times, join with a SLST to first SC

Total: 60 SC, 64 x CH 2 SP, 64 x CH 1 SP, 96 x 1LOPuff ST

Per side: 15 SC, 16 x CH 2 SP, 16 x CH 1 SP, 24 x 1LOPuff ST

Corner: 2 SC, CH 2, 2 SC

---

Start of the Round:

After finishing Round 25:

---

Round 26: SLST to CH 2 SP, CH 1, [{2 HDC, CH 2, 2 HDC} in CH 2 SP (corner), 1 HDC in next 6 STS, 2 HDC in next CH 2 SP, 1 HDC in each 1LOPuff ST (skipping CH 1 SP between them), 2 HDC in next CH 2 SP, [1 HDC in next ST (SC), 2 HDC in next CH 2 SP, 1 HDC in each 1LOPuff ST (skipping CH 1 SP between them), 2 HDC in next CH 2] 7 times, 1 HDC in next 6 STS] 4 times, join with a SLST to first HDC

Total: 300 HDC

Per side: 75 HDC

Corner: 2 HDC, CH 2, 2 HDC

Round 27: SLST to CH 2 SP, {CH 3 (counts as DC), 1 DC, CH 2, 2 DC} in CH 2 corner SP (corner), [SK 3 STS, {V ST in next ST, SK 3 STS} 19 times, {2 DC, CH 2, 2 DC} in CH 2 corner SP] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 76 V ST

Per side: 19 V ST

Corner: 2 DC, CH 2, 2 DC

Round 28: SLST to CH 2 SP, {CH 3 (counts as DC), 4 DC, CH 2, 5 DC} in CH 2 corner SP (corner), [SK 3 STS (2 DC+1^st DC of V ST), 1 SC in CH 2 SP of V ST, {7 DC in next CH 2 SP of next V ST, 1 SC in next CH 2 SP of next V ST} 9 times, SK next 3 STS (last DC of last V ST+2 DC), {5 DC, CH 2, 5 DC} in CH 2 corner SP (corner)] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 36 Shells, 40 SC

Per side: 9 Shells, 10 SC

Corner: 5 DC, CH 2, 5 DC

Round 29: SLST to CH 2 SP, {CH 3 (counts as DC), 1 DC, CH 2, 2 DC} in CH 2 corner SP (corner), [1 BPDC around next 5 STS, 1 FPTR around first DC of Round 27, SK next ST (SC), {1 FPTR around first DC of V ST with Shell in it from Round 27, 1 BPDC around next 7 STS, 1 FPTR around last DC of V ST with Shell in it from Round 27, SK next ST (SC)} 9 times, 1 FPTR around last DC of Round 27, 1 BPDC around next 5 STS, {2 DC, CH 2, 2 DC} in CH 2 corner SP (corner)] 4 times, omitting last corner, join with a SLST to top of CH 3

Total: 292 BPDC, 80 FPTR

Per side: 73 BPDC, 20 FPTR

Corner: 2 DC, CH 2, 2 DC

Round 30: SLST to CH 2 SP, CH 1, [{2 SC, CH 2, 2 SC} in 2 corner SP (corner), 1 SC in next 4 STS, CH 2, SK next 4 STS (3 DC,1 FPTR), {1 1LOPuff ST, CH 1, 1 1LOPuff ST, CH 1, 1 1LOPuff ST} in SC from Round 28 (the TR STS should be behind the Puff STS), CH 2, SK next 4 STS (1 FPTR, 3 DC), [1 SC in next ST (4^th ST of Shell), CH 2, SK 4 STS (3 DC,1 FPTR), {1 1LOPuff ST, CH 1, 1 1LOPuff ST, CH 1, 1 1LOPuff ST} in SC from Round 28 (the TR STS should be behind the Puff STS), CH 2, SK next 4 STS (1 FPTR, 3 DC)]9 times, 1 SC in next 4 STS] 4 times, join with a SLST to first SC

Total: 68 SC, 80 x CH 2 SP, 80 x CH 1 SP, 120 x 1LOPuff ST

Per side: 17 SC, 20 x CH 2 SP, 20 x CH 1 SP, 30 x 1LOPuff ST

Corner: 2 SC, CH 2, 2 SC

Round 31: SLST to CH 2 SP, CH 1, [{2 HDC, CH 2, 2 HDC} in CH 2 SP (corner), 1 HDC in next 6 STS, 2 HDC in next CH 2 SP, 1 HDC in each 1LOPuff ST (skipping CH 1 SP between them), 2 HDC in next CH 2 SP, [1 HDC in next ST (SC), 2 HDC in next CH 2 SP, 1 HDC in each 1LOPuff ST (skipping CH 1 SP between them), 2 HDC in next CH 2] 9 times, 1 HDC in next 6 STS] 4 times, join with a SLST to first HDC

Total: 364 HDC

Per side: 91 HDC

Corner: 2 HDC, CH 2, 2 HDC

---

After finishing Round 31:

Side:

---

Round 32: SLST to CH 2 SP, CH 1, [{2 HDC, CH 2, 2 HDC} in CH 2 SP (corner), 1 HDC3LO in each ST on side] 4 times, join with a SLST to first HDC

Total: 380 HDC3LO

Per side: 95 HDC3LO

Corner: 2 HDC, CH 2, 2 HDC

---

NOTE: YOU CAN BLOCK YOUR PROJECT IF YOU FEEL IT’S NECESSARY.

---

END OF PART 2.

---

Click HERE to go to Part 3.

---

Thank you for choosing this pattern for your project! When you make it, I’d like to see it! Remember to tag me – @k.a.m.e_crochet or use hashtag #kamecrochet on Instagram.

You can also join my Facebook Group where you can get updates on new pattern releases or help with existing ones if you get stuck.

https://www.facebook.com/groups/975632939436008/?ref=bookmarks

If you have any questions about the pattern, you can also contact me directly at kamecrochet@gmail.com  or

Ravelry:              https://www.ravelry.com/people/Mytia89

Facebook: https://www.facebook.com/KAMECrochet

Instagram:         https://www.instagram.com/k.a.m.e_crochet

Happy Crocheting!